JS1000® COATING
Guaranteed performance that outperforms premium coatings
At a fraction of the cost.
Years of research and experience in the manufacture of long-life fasteners have produced a true innovation: The Leland JS1000® extreme life plating.
The proof is in the testing:
Check out the features of Leland’s JS1000®:
Suitability of the products described herein, for the purpose intended, is the sole responsibility of the design engineer, architect or otherwise responsible person charged with the design of the structure.
Rely on North American quality!
JS1000® is an exclusive Leland formula
JS1000® is applied to all Leland and CTL products as required
JS1000® is 100% North American
bolts for metal construction
NEW
EXPANDED BOLT OFFERING to 3/4" x 6"
Grade 2, 5, 8, 300 Series and 410 Stainless Steel Available
Call for a quote!
SPECIAL BOLTS
All products are available in carbon or stainless steel, fractional or metric dimensions.
CLEVIS PINS
WE MAKE NUTS!
Nuts are available in carbon steel and 304-316 stainless steel
Demand Leland “NF” & “L” head markings that guarantee 100% North American manufactured fasteners made with North American Steel
All product is manufactured by Leland Industries and is available in metric dimensions
Now Leland offers custom threading capability
STANDARD & CUSTOM FASTENERS ENGINEERED TO YOUR SPECIFICATIONS
With the acquisition of Canadian Threadall Limited., Canada’s largest custom threader, Leland can offer you a complete variety of quality threaded products in most ferrous and non-ferrous metals.
We have the capability of thread and form parts as small as #4-40 and as large as 4-1/2 inches in diameter. We can manufacture special threaded rods and studs, and provide a full range of coarse, fine and acme threads up to 4-1/2” in diameter – in both right and left hand styles, including ACME.
BENT BOLTS
CUSTOMIZED ORDERS
Custom threading is one of the company’s specialties, but the ability to supply a variety of products is an important priority at CTL. We have the capability to manufacture special threaded rods and studs and to provide a full range of coarse, fine and Acme threads up to four inches in diameter in both right and left hand threads.
Aside from its manufacturing capability, CTL stocks a full inventory of threaded rods, nuts, washers and miscellaneous fasteners.
CTL’s bending equipment includes a 6” Bull Bender. Both are able to bend a variety of configurations. In addition to this, a group of hydraulic benders exists that can form a host of shapes and sizes such as “Eye Bolts”, “U-bolts”, “J-bolts” and “L-bolts”. Materials can be bent from 1/16 of an inch to 4 inches in diameter.
Grade 2, 5, 5.2, 8, Stainless Steel & Alloy Available
Call for a quote!
SPECIALTY FASTENERS
SCREWS
THREAD TYPES
WOOD SCREWS
Cut their own mating thread in wood. In hard wood, a pre-drilled starter hole is required to prevent splitting of the material.
LAG SCREWS
Fastener, with thread conical point, normally used in wood or masonry with an expansion anchor fitted to a pre-drilled hole.
DRIVING RECESSES
FLASHINGS
COATING SYSTEMS
ALL LELAND AND CANADIAN THREADALL FASTENERS ARE PRODUCED WITH HEXAVALENT CHROMIUM-FREE PLATINGS
OTHER COATINGS AVAILABLE:
Phosphate & Oil, Hot Dip Galvanizing, Black Zinc & Yellow Dichromate
Leland fasteners are also available in 410 Stainless & 18-8 300 Series materials
DT1700 LONGLIFE COATING IS A SPECIAL ANTI-CORROSION PROTECTION SYSTEM ACQ COMPATIBLE FOR TREATED WOOD
DT1700 LONGLIFE COATING IS APPLIED OVER A SUBSTRATE OF JS1000.
JS1000 PLATING SYSTEM IS AN ENHANCED ANTI-CORROSION PROTECTION SYSTEM THAT IS APPLIED TO ALL FASTENERS MANUFACTURED BY LELAND AND CANADIAN THREADALL
JS1000 PLATING SYSTEM IS APPLIED BEFORE ANY ADDITIONAL COATING 1000 HOURS SALT SPRAY LIFE, 3 TO 5 CYCLES, 2 LITRE SO2/CYCLE KESTERNICH. IN THE EVENT OF A SCRATCH, JS REACTS WITH ZINC TO SEAL THE SCRATCH.
THE ULTIMATE CORROSION PROTECTION SYSTEM.
NO RISK OF HYDROGEN EMBRITTLEMENT
INORGANIC ZINC RICH CORROSION PROTECTION BASE COAT CONTAINING ZINC AND ALUMINUM FLAKES
PROVIDES UP TO 3,000 HOURS OF RUST-FREE PERFORMANCE IN SALT-SPRAY TESTS
5 TIMES MORE THAN HOT DIP GALVANIZING
60 TIMES MORE THAN ELECTRO-PLATED PRODUCT
JS600 PLATING SYSTEM IS A HIGH LUBRICITY ANTI-CORROSION PROTECTION SYSTEM FOR STAINLESS STEEL
LELAND’S JS600 PLATING SYSTEM ELIMINATES GALLING DURING ASSEMBLY.
POWDER COATED TOUGH IS THE NEW STANDARD IN PAINTED FINISHES
LELAND POWDER COATS UNDER THE FASTENER HEAD WHERE CORROSION BEGINS. ABSOLUTELY THE FINEST, MOST DURABLE, PROTECTIVE COATING IN THE FASTENER INDUSTRY
POWDER PAINT OVER JS1000 EXCEEDS 3000 HOURS SALT SPRAY LIFE AND EXCEEDS 50 CYCLES, 2L S02/CYCLE KESTERNICH.
PACKAGING PROGRAMS